Verkkokauppa
CEN/TS 1090-201:2024:en
Execution of steel structures and aluminium structures. Reuse of structural steel
Soveltamisala
Suomenkielistä soveltamisalaa ei ole saatavissa.
This CEN/TS gives complementary provisions for the use of reclaimed structural components in the execution of steel structures in EXC1 to EXC3 according to EN 1090-2. The provisions apply to products used in structures to be designed according to EN 1993-1-1 without seismic and/or fatigue design.
This CEN/TS specifies requirements for the reusability assessment of reclaimed structural components and the declaration of mechanical and geometrical properties as well as weldability. The properties to be declared are those listed as required relevant properties to be specified according to clause 5.1 of EN 1090-2:
• strength (yield and tensile);
• elongation;
• tolerances on dimensions and shape;
• heat treatment delivery conditions;
• weldability.
This CEN/TS applies to reclaimed hot rolled profiles and hot finished or cold formed hollow sections used as constituent products according to EN 1090-2.
This CEN/TS can also be used for the assessment of the aforementioned properties of fabricated products.
The recommendations for the assessment of connections however, and in particular of welds, is non exhaustive and only informative.
This CEN/TS is not intended for thin gauge products according to EN 1090-4 or mechanical fasteners.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
This CEN/TS gives complementary provisions for the use of reclaimed structural components in the execution of steel structures in EXC1 to EXC3 according to EN 1090-2. The provisions apply to products used in structures to be designed according to EN 1993-1-1 without seismic and/or fatigue design.
This CEN/TS specifies requirements for the reusability assessment of reclaimed structural components and the declaration of mechanical and geometrical properties as well as weldability. The properties to be declared are those listed as required relevant properties to be specified according to clause 5.1 of EN 1090-2:
• strength (yield and tensile);
• elongation;
• tolerances on dimensions and shape;
• heat treatment delivery conditions;
• weldability.
This CEN/TS applies to reclaimed hot rolled profiles and hot finished or cold formed hollow sections used as constituent products according to EN 1090-2.
This CEN/TS can also be used for the assessment of the aforementioned properties of fabricated products.
The recommendations for the assessment of connections however, and in particular of welds, is non exhaustive and only informative.
This CEN/TS is not intended for thin gauge products according to EN 1090-4 or mechanical fasteners.
Tämän julkaisun valmistelusta Suomessa vastaa Metalliteollisuuden Standardisointiyhdistys ry, puh. 09 19 231 (vaihde).
Tuoteryhmä(t)
Sidokset
Velvoittavat viittaukset
Tässä julkaisussa ei ole velvoittavia viittauksia
Tekninen komitea
Vahvistuspäivä
01.11.2024
Julkaisupäivä
05.11.2024
Painos
1
Sivumäärä
29
Julkaisun kieli
englanti